Get Event Correlation Policy Rule (v2.1)
GET/sdwan/v2.1/api/eventcorrelationpolicysets/:policy_set_id/eventcorrelationpolicyrules/:policy_rule_id
List the event correlation policy rule.
Request
Path Parameters
ID of the event policy set.
ID of the event policy rule.
Responses
- 200
Successful Operation
- application/json
- Schema
- Example (from schema)
Schema
Dampening duration cannot be less than 5 minutes. Dampening for duration cannot be more than 10080 minutes(a week).
Description of the event correlation policy rules.
The enabled event correlation policy rules.
The end date in MM/DD/YYYY HH: mm format of the applied event policy rule.
escalation_rules EscalationRule
The alarms which have their priority escalated based on standing rule and flap rule.
flap_rule FlapRule
Resource flaps more than the rate specified during the defined interval, then a new flap rate exceeded alarm is generated.
Flap duration cannot be less than 5 minutes and more than 10080 minutes (a week).
Flap count cannot be lower than 2 nor higher than 512.
standing_rule StandingRule
Alarms standing for more than the specified period.
Possible values: [p1
, p2
, p3
, p4
, p5
, none
]
Priority specified for the standing rule. Range from Priority 1 (P1), through Priority 5 (P5).
Standing for duration cannot be less than 5 minutes and more than 10080 minutes(a week).
Possible values: [DEVICEHW_POWER_LOST
, DEVICEHW_INTERFACE_DOWN
, DEVICEHW_INTERFACE_HALFDUPLEX
, DEVICEHW_INTERFACE_ERRORS
, DEVICEHW_DISKUTIL_PARTITIONSPACE
, DEVICEHW_DISKENC_SYSTEM
, DEVICEHW_MEMUTIL_SWAPSPACE
, DEVICESW_GENERAL_PROCESSRESTART
, DEVICESW_GENERAL_PROCESSSTOP
, DEVICESW_CRITICAL_PROCESSRESTART
, DEVICESW_CRITICAL_PROCESSSTOP
, DEVICESW_LICENSE_VERIFICATION_FAILED
, DEVICESW_MONITOR_DISABLED
, DEVICESW_SYSTEM_BOOT
, DEVICESW_TOKEN_VERIFICATION_FAILED
, DEVICESW_IMAGE_UNSUPPORTED
, DEVICESW_DHCPSERVER_RESTART
, DEVICESW_DHCPRELAY_RESTART
, DEVICESW_DHCPSERVER_ERRORS
, DEVICESW_SNMP_AGENT_RESTART
, DEVICESW_SNMP_AGENT_FAILED_TO_START
, DEVICESW_SYSLOGSERVERS_DOWN
, DEVICESW_NTP_NO_SYNC
, DEVICEIF_ADDRESS_DUPLICATE
, DEVICEIF_IPV6_ADDRESS_DUPLICATE
, NETWORK_VPNLINK_DOWN
, NETWORK_VPNPEER_UNAVAILABLE
, NETWORK_VPNPEER_UNREACHABLE
, NETWORK_VPNSS_MISMATCH
, NETWORK_VPNSS_UNAVAILABLE
, NETWORK_VPNBFD_DOWN
, NETWORK_VPNLINKCIPHERS_INCOMPATIBLE
, NETWORK_DIRECTPRIVATE_DOWN
, NETWORK_DIRECTINTERNET_DOWN
, NETWORK_PRIVATEWAN_UNREACHABLE
, NETWORK_PRIVATEWAN_DEGRADED
, PEERING_EDGE_DOWN
, PEERING_CORE_DOWN
, PEERING_BGP_DOWN
, APPLICATION_APP_UNREACHABLE
, APPLICATION_IP_COLLISION
, APPLICATION_UNKNOWNS_HIGH
, APPLICATION_FLOWCTRL_APPUNREACHABLE
, APPLICATION_FLOWCTRL_APPREACHABLE
, APPLICATION_FLOWCTRL_APPWITHINSLA
, APPLICATION_FLOWCTRL_APPOUTSIDESLA
, OPERATOR_SIGNUP_TOKEN_DISABLED
, DEVICESW_FPS_LIMIT_EXCEEDED
, DEVICESW_CONCURRENT_FLOW_SOFTLIMIT_EXCEEDED
, DEVICESW_CONCURRENT_FLOWLIMIT_EXCEEDED
, SITE_CIRCUIT_ABSENT_FOR_POLICY
, NETWORK_POLICY_RULE_CONFLICT
, PRIORITY_POLICY_RULE_CONFLICT
, APPLICATION_CUSTOM_RULE_CONFLICT
, NETWORK_POLICY_RULE_DROPPED
, PRIORITY_POLICY_RULE_DROPPED
, DEVICESW_DISCONNECTED_FROM_CONTROLLER
, DEVICESW_USERIDAGENTS_DOWN
, SPOKEHA_STATE_UPDATE
, SPOKEHA_MULTIPLE_ACTIVE_DEVICES
, SPOKEHA_CLUSTER_DEGRADED
, SPOKEHA_CLUSTER_DOWN
, NAT_POLICY_LEGACY_ALG_CONFIG_OVERRIDE
, NAT_POLICY_STATIC_NATPOOL_OVERRUN
, DEVICESW_CONNTRACK_FLOWLIMIT_EXCEEDED
, DEVICESW_INITIATED_CONNECTION_ON_EXCLUDED_PATH
, NETWORK_ANYNETLINK_DEGRADED
, NETWORK_ANYNETLINK_DOWN
, CLAIMCERT_RENEWAL_RETRY_LIMIT_EXCEEDED
, CLAIMCERT_RENEWAL_FAILED
, CLAIMCERT_AUTO_RENEWAL_DISABLED
, CLAIMCERT_RENEWALS_TOO_FREQUENT
, FLAP_RATE_EXCEEDED
, DEVICESW_ANALYTICS_DISCONNECTED_FROM_CONTROLLER
, DEVICESW_FLOWS_DISCONNECTED_FROM_CONTROLLER
, APPLICATION_PROBE_DISABLED
, SITE_CONNECTIVITY_DOWN
, NETWORK_STANDARD_VPN_ENDPOINT_DOWN
, SECURITY_POLICY_RULE_INCOMPLETE
, SITE_NETWORK_SERVICE_ABSENT_FOR_POLICY
, DEVICESW_IPFIX_COLLECTORS_DOWN
, SITE_CONNECTIVITY_DEGRADED
, CLAIMCERT_EXPIRY_WARNING
, DEVICE_CELLULAR_ROAMING
, DEVICE_CELLULAR_SIM_REMOVAL
, DEVICE_CELLULAR_SIM_SWITCHOVER
, DEVICE_CELLULAR_SIGNAL_STRENGTH_THRESH
, DEVICE_CELLULAR_INTERNAL_MODEM_ERROR
, DEVICE_CELLULAR_TECH_CHANGE
, DEVICE_CELLULAR_SIM_PIN_ERROR
, DEVICE_CELLULAR_SIM_PUK_NEEDED
, DEVICE_CELLULAR_MODEM_TEMP_HIGH
, DEVICE_CELLULAR_MTU_MISMATCH
, DEVICE_CELLULAR_MODEM_DETECTION_ERROR
, DEVICE_CELLULAR_SIM_SECURITY_ERROR
, DEVICE_CELLULAR_FIRMWARE_NOT_AVAILABLE
, DEVICEHW_ION9000X722FW_OUTOFDATE
, DEVICESW_APPDEF_SIGFILE_MISMATCH
, SECURITY_POLICY_LIMITS_EXCEEDED
, SASE_SERVICEENDPOINT_BANDWIDTH_LIMIT_EXCEEDED
, SASE_SERVICEENDPOINT_BANDWIDTH_SOFT_LIMIT_EXCEEDED
, VION_BANDWIDTH_LIMIT_EXCEEDED
, VION_BANDWIDTH_SOFT_LIMIT_EXCEEDED
, SPN_BANDWIDTH_LIMIT_EXCEEDED
, SPN_BANDWIDTH_SOFT_LIMIT_EXCEEDED
, DEVICE_POE_PORT_POWER_STATUS
, DEVICE_POE_PORT_POWER_OVER_THRESHOLD
, DEVICE_POE_MAIN_POWER_OVER_THRESHOLD
, DEVICE_POE_MAIN_POWER_FAULT
, DOT1X_RADIUS_SERVER_UNREACHABLE
, DOT1X_DYNAMIC_VLAN_NOT_CONFIGURED
, DOT1X_CLIENT_AUTH_FAIL
, HUB_CLUSTER_SITE_COUNT_THRESHOLD_EXCEEDED
, DEVICEHW_DISKUTIL_FRUSSD
, DEVICEHW_TEMPERATURE_SENSOR
, USER_ID_DIRECTORY_SYNC_FAILED
, USER_ID_HUB_SELECTION_FAILED
, DEVICE_POE_SHUT_CPU_TEMP_OVER_THRESHOLD
, DEVICESW_INTERFACE_CONFIG_OUTOFSYNC
, DEVICE_CELLULAR_INTERFACE_CONFIG_OUTOFSYNC
, DEVICE_CELLULAR_MODULE_CONFIG_OUTOFSYNC
, CARRIER_PERFORMANCE_DEGRADED
, CIRCUIT_PERFORMANCE_DEGRADED
, APPLICATION_PERFORMANCE_DEGRADED
, DEVICE_ID_HUB_SELECTION_FAILED
, NETWORK_VPNKEK_UNAVAILABLE
, DEVICEHW_FAN_LOST
, DEVICESW_MFGCERT_RENEWAL_FAILED
, DEVICEHW_POWER_MISSING
, SYSTEM_CIRCUIT_UTILIZATION_THRESHOLD_EXCEEDED
, SYSTEM_CPU_THRESHOLD_EXCEEDED
, SYSTEM_MEMORY_THRESHOLD_EXCEEDED
, SYSTEM_DISK_THRESHOLD_EXCEEDED
, SYSTEM_CONCURRENT_FLOW_THRESHOLD_EXCEEDED
, DEVICESW_MCTD_INITIALIZATION_FAILURE
, DEVICESW_MCTD_CONTENT_LOAD_FAILURE
, DEVICESW_MCTD_LOG_BUFFER_FULL
, ALL_INCIDENTS
, ALL_ALERTS
, BRANCH_GATEWAY_CLUSTER_SITE_COUNT_THRESHOLD_EXCEEDED
]
List all the event codes.
ID of the event policy set.
Name of the event policy set. Max 25 characters.
Possible values: [p1
, p2
, p3
, p4
, p5
, none
]
Priority level set for the event policy rule.
The resource IDs configured for a rule. Max 128 resources can be configured in a rule.
Possible values: [site
, element
, anynetlink
, bgppeer
, interface
, waninterface
, wannetwork
, networkpolicyset
, prioritypolicyset
, natpolicyset
, securitypolicyset
, appdef
, serviceendpoint
, cellular_module
, user_id
]
The resource on which the event policy rule is applied.
The start date in MM/DD/YYYY HH: mm format of the event policy rule applied.
Possible values: [spoke
, hub
, public
, private
]
The sub-resource type to narrow down the match criteria to more specific elements.
Possible values: [yes
, no
, none
]
The sub-resource type to narrow down the match criteria to more specific elements.The event policy rule which suppresses or unsuppress the alarms on the resources identified by the resource type, sub-resource type, or matched event codes during the specified schedule.
A information field that can be added to identify the event correlation policy rule. Maximum 10 unique tags of length 1024 each are allowed.
{
"dampening_duration": 0,
"enabled": true,
"end_time": 0,
"escalation_rules": {
"flap_rule": {
"flap_duration": 0,
"flap_rate": 0
},
"standing_rule": {
"priority": "p1",
"standing_for": 0
}
},
"event_codes": [
"DEVICEHW_POWER_LOST"
],
"id": "string",
"name": "string",
"priority": "p1",
"resource_ids": [
"string"
],
"resource_type": "site",
"start_time": 0,
"sub_resource_type": "spoke",
"suppress": "yes",
"tags": [
"string"
]
}